Schneider Electric NSYCVF85M230PF Climasys Forced Vent. Ip54, 85M3/H, 230V, With Outlet Grille and Filter G2

ClimaSys CV Axial motor ventilator. 230V 50Hz or 60Hz. 17 W 50 Hz, 15 W 60 Hz. Free flow rate with standard filter of 85 m3/h at 50 Hz and 98 m3/h at 60 Hz. 170 x 150 x 62 mm. Cut-out dimensions of 125 x 125 mm. Outlet grille injected thermoplastic (ASA PC), Grey RAL 7035. Connections terminals by cable. 2 protective grille on the front and rear surfaces. Protection IP54.

Main

• Range: ClimaSys
• Product Name: ClimaSys CV
• Product or Component Type: Fan
• Type of Filter: Standard
• Flow Rate:
• Free flow rate with standard filter: 85 m³/h at 50 Hz
• Free flow rate with standard filter: 98 m³/h at 60 Hz
• [Us] Rated Supply Voltage: 175...253 V
• Input Voltage: 230 V 50/60 Hz

Complementary

• Absorbed Power:
• 15 W at 60 Hz
• 17 W at 50 Hz
• [In] Rated Current:
• 0.121 A at 50 Hz
• 0.097 A at 60 Hz
• Noise Level: Less than 46…49 dB
• Bearing Type: Ball
• Dimensions:
• Height: External: 170 mm
• Width: External: 150 mm
• Depth: External: 62 mm
• Cut-out Dimensions: 125 x 125 mm
• Net Weight: 0.78 kg
• Material: Outlet Grille: Injected Thermoplastic (ASA PC)
• Colour: Outlet Grille: Grey (RAL 7035)
• Ambient Air Temperature:
• Operation: -20…60 °C
• Storage: -40…70 °C
• Maximum Pressure: 50 Pa at 0 m³/h flow rate
• Connections - Terminals: Faston Connector
• IP Degree of Protection: IP54
• Device Composition:
• 1 Axial Motor
• 2 Protective Grilles (on the Front and Rear Surfaces)
• 1 Filter (Front of Axial Motor)
• 1 Outlet Grille (Front)
• 1 Cut-out Template
• 1 Power Cord
• Condition of Use:
• Flow rates depend on the work point; see ProClima software
• Surrounding environment must be relatively clean
• Filter must be cleaned and replaced regularly
• Overfrequent filter replacement should be avoided
• Outside temperature must be 5 °C lower than inside temperature