The Sense-Ware Flame Detector Test Lamp activates UV, IR and UV/IR flame detectors which detect in the 185-235 nm UV and 4.4 µ IR frequency ranges. For UV only detectors the maximum distance is up to 8 meters(26 ft) in the continuous mode. The test range for IR and UV/IR detectors is up to 4 meters (13 ft). Most IR Flame detectors have an extra alarm criterion; analysing the flicker frequency of a fire. In order to simulate the flame flicker, the lamp needs to be pulse operated. For this, the test lamp can be put into the pulse mode by means of a selection switch on the left side of the test lamp. The lamp then emits pulsed light with a frequency of approx. 2 Hz. After the alarm delay time the IR or UV/IR flame detector will activate.
- Universal Flame Detector Test lamp
- Selectable Continuous mode for UV and Pulsing mode for IR and UV/IR
- UV detector check up to 8 meters (26 ft)
- IR and UV/IR flame detector check up to 4 meters (13 ft)
- Universal charger 100-240 Vac with pins for US, EU, GB en AU
- Brand: Senseware
- Product Type: Flame Detector Tester Kit
- Housing Material: Acrylonitrile Butadiene Styrene (ABS) Plastic
- Case Material: Polypropylene, Inlay Polyurethane
- Adapter: Charger
- Charger Voltage: 100-240 V/AC
- Charger Amperage: 500 mA
- Test Range UV Flame Detectors (Continue Mode): up to 8 m (26 ft)
- Test Range UV Flame Detectors (Pulse Mode): up to 4 m (13 ft)
- Test Range IR and UV/IR Flame Detectors: up to 4 m (13 ft)
- Battery Type: Sealed Lead Acid
- Battery Voltage: 12 V/DC
- Battery Amperage: 2.7 Ah
- Lamp Type: Halogen (H3)
- Lamp Voltage: 12 V/DC
- Lamp Wattage: 100 W
- Use (Optimal and Continuous): 10-15 mins
- Temperature Range: 4 to 40°C (39 to 104°F)
- Country of Origin: Europe
- SKU : T-229/4P - without Case
- SKU : TC-229/4P - with Case